Mechanical ventilation ventilator variables

Mechanical ventilation Microchapters
Home
Patient Information
Overview
Historical Perspective
Types of Ventilators
Indications for Use
Ventilator variables
Choosing Amongst Ventilator Modes
Initial Ventilator Settings
Protocol
Complications
Modification of Settings
Connection to Ventilators
Terminology
Mechanical ventilation ventilator variables On the Web
Most recent articles
Most cited articles
Review articles
CME Programs
Powerpoint slides
Images
American Roentgen Ray Society Images of Mechanical ventilation ventilator variables All Images X-rays Echo & Ultrasound CT Images MRI
Ongoing Trials at Clinical Trials.gov
US National Guidelines Clearinghouse
NICE Guidance
FDA on Mechanical ventilation ventilator variables
CDC on Mechanical ventilation ventilator variables
Mechanical ventilation ventilator variables in the news
Blogs on Mechanical ventilation ventilator variables
Directions to Hospitals Treating Mechanical ventilation
Risk calculators and risk factors for Mechanical ventilation ventilator variables

Editor-In-Chief: C. Michael Gibson, M.S., M.D. [1]; Associate Editor(s)-in-Chief: Syed Hassan A. Kazmi BSc, MD [2]

Variables variables

The following are the various variables on a ventilator:

FiO2

• Fraction of inspired air that is oxygen

Tidal volume (Vt)

• Volume of breath delivered
• Target should be lung protective: goal of less than equal to 6 cc/Kg

Repiratory rate (f)

• Rate is set by ventilator
• f may be lower than respiratory rate if breaths are patient triggered

Positive end expiratory pressure (PEEP)

• Positive pressure applied during exhalation via resistor in exhalation port
• Prevents alveolar collapse
• Decreases shunting
• Increases oxygentaion via alveolar recruitment
• Improves compliance
• Allows severely obstructed patient to initiate breaths
• Cardiac effects include decreased preload by increased intrathoracic pressure and decreased venous return to the heart. Decreases afterload by decreasing cardiac transmural pressure
• Adjustable oxygen delivery

• Auto-PEEP or intrinsic PEEP is a phenomenon where there is inadequate exhalation time and the lungs are unable to completely empty before the next breath (breath stacking)
• Auto-PEEP will decrease preload and may decrease cardiac output especially if patient is hypovolemic. It also increases work of breathing because patient must overcome auto-PEEP to trigger ventilator. It may be detected if end expiratory flow is not equal to zero before the next breath
• Auto-PEEP can be decreased by the following measures:
  • Increase expiratory time
  • Decrease respiratory rate
  • Decrease tidal volume
  • Manage bronchospasm and secretions

Inspiratory time

• Normally inspiratory to expiratory ratio (I:E) is 1-2
• Can be used to alter flow rate
• Used in pressure-control mode

Inspiratory flow rate

• Increased flow rate leads to decreased inspiratory time and increased expiratory time. Therefore, may improve ventilation in obstructive lung disease.
• May affect respiratory rate and bronchodilation/bronchoconstriction

Peak inspiratory pressure (PIP)

• Dynamic measurement during inspiration
• Set in pressure-targeted mode
• Determined by airway resistance and lung compliance
• Increased PIP without increased plateau pressure (Pplat) implies increased airway resistance (e.g. bronchospasm, plugging)
• Decreased PIP implies decreased airway resistance or air leak in the system

Plateau pressure (Pplat)

• Static measurement at the end of inspiration, when there is no flow.
• Determined by repiratory system compliance (airway resistance is not a factor since there is no flow)
• Increased Pplat implies decreased lung or chest wall compliance (e.g. pneumothorax, pulmonary edema, pneumonia, atelectasis). It may also be due to increased PEEP or auto-PEEP.
• Pplat < 30 cm H2O decreases barotrauma (decreased Vt, decreased PEEP or increased compliance for example secondary to diuresus)

Ventilator variables