Mechanical ventilation resident survival guide

Mechanical ventilation Resident Survival Guide Microchapters
Overview
Classification
Indications
FIRE
Mode and variable selection
Do's
Donts

Indications

The following are the indications of mechanical ventilation:

• Cardiac or respiratory arrest
• Tachypnea or bradypnea with respiratory fatigue or impending arrest
• Acute respiratory acidosis
• Refractory hypoxemia
• Refractory hypoxemia (when the P a O 2 could not be maintained above 60 mm Hg with inspired O 2 fraction (F I O 2 )>1.0)
• Inability to protect the airway associated with depressed levels of consciousness
• Shock associated with excessive respiratory work
• Inability to clear secretions with impaired gas exchange or excessive respiratory work
• Newly diagnosed neuromuscular disease with a vital capacity <10 - 15 mL/kg
• Short term adjunct in management of acutely increased intracranial pressure (ICP) intracranial pressure (ICP) 

Non-Invasive mechanical ventilation

Consider non-invasive mechanical ventilation especially in the following conditions:

• COPD exacerbation
• Cardiogenic pulmonary edema
• Obesity hypoventilation syndrome
• Patients with asthma or patients with non-cardiogenic hypoxemic respiratory failure

FIRE: Focused Initial Rapid Evaluation

A Focused Initial Rapid Evaluation (FIRE) should be performed to identify patients of severe acute respiratory failure and in need of immediate intervention.

Boxes in red signify that an urgent management is needed.

Abbreviations

Boxes in red signify that an urgent management is needed.

References

Assess the patient for respiratory distress ❑Color (Nail bed or lip cyanosis, pale or diaphoretic) ❑Respiratory rate ❑Breathing pattern ❑Use of accessory muscles ❑Paradoxical chest movement ❑Easily audible breath sounds ❑Work of breathing ❑Past medical history of COPD/COPD exacerbation, asthma ❑Pulmonary crepitations/rales/crackles ❑Third heart sound (S3) ❑Look for critical values on ABGs (pH <7.25, PaCO2 >55 mm Hg and rising, PaO2 < 70 mm Hg, alveolar-arterial O2 difference > 450, PaO2/PAO2 <0.15)

Does the patient have any of the following findings that require invasive ventilation? ❑Respiratory arrest ❑Respiratory rate >35 breaths/min ❑Severe dyspnea with use of accessory muscle of respiration ❑Life-threatening hypoxemia (PaO2 <40 mm HG or PaO2/FiO2 <200) ❑Severe acidosis (pH <7.25) and hypercapnia (PaCO2 >60 mm Hg) ❑Cardiovascular complication (Hypotenion, shock, heart failure) ❑Failure of non-invasive mechanical ventilation< ❑Upper airway obstruction ❑Inability to protect airway ❑Inability to clear respiratory secretions ❑Facial or head surgery/trauma ❑Hemodynamic instability ❑Uncooperative patient

Yes

No

Switch to invasive mechanical ventilation

Continue non-invasive mechanical ventilation

Initial stabilization: ❑Always elevate the head of the bed >30 º ❑Use ulcer and DVT prophylaxis, unless contraindicated ❑Use lung protective ventilation strategy for patients with acute lung lnjury (TV ~ 6 ml/kg ideal body weight, Plat pressure < 30 cmH 2 O) ❑Modify ventilator settings primarily to achieve patient-ventilator synchrony. If this fails, use the least amount of sedation required to achieve comfort and avoid unnecessary neuromuscular blockade Initial parameters and protocols for adults ❑Volume-Ventilation may be used for the majority of patients, but pressure ventilation (PV or PRVC) should be considered if peak pressures rise over 40 cm H2O or plateau pressures rise >30 cm H2O. ❑Tidal Volume: 4 to 12 mL/Kg of ideal body weight (IBW), while maintaining plateau pressure < 30 cm H2O and delta P < 20 cm H2O. ❑Minute ventilation: 4.0 x BSA (Body Surface Area) = VE (L/min) for males and 3.5 x BSA = VE (L/min) for females adjusted for altitude and body temperature while maintaining plateau pressure < 30 cm H2O and delta P <20 cm H2O. ❑Rate: 8 to 26 breaths/minute adjusted to achieve optimum total cycle time and maintain desired minute ventilation, while maintaining plateau pressure < 30 cm H2O and delta P < 20 cm H2O. ❑FiO2: Initial setting of 0.6 to 0.9 until results from arterial blood gases (ABG) can be obtained and the setting adjusted Initial ABG should be obtained 15-45 minutes from start of ventilation Pulse oximetry should be correlated with initial ABG and the patient subsequently monitored with continuous pulse oximetry to maintain SpO2 at or above patient’s normal or >90% SpO2 (Oxygen saturation by pulse oximetry). PEEP 5 to 15 cm H2O. Set initial PEEP at 5 cm H2O, unless otherwise indicated. Higher PEEPs may be required with acute lung injury (ALI) or acute respiratory distress syndrome (ARDS) ❑Pressure Support (PS): 8 to 20 cm H2O. Maintain Pplateau <30 cm H2O and delta P < 20 cm H2O. PS should be adjusted to reduce work of breathing and patient fatigue and support effective ventilation. ❑I:E ratio less than 1:1 (example 1:3). The I:E ratio should be optimized along with total cycle time (TCT) to provide optimum mean airway pressure, lung filling, lung emptying (minimizing air-trapping/Auto-PEEP), patient/ventilator synchrony