Stubs iron wire gauge

Editor-In-Chief: C. Michael Gibson, M.S., M.D. [1]

Please Take Over This Page and Apply to be Editor-In-Chief for this topic: There can be one or more than one Editor-In-Chief. You may also apply to be an Associate Editor-In-Chief of one of the subtopics below. Please mail us [2] to indicate your interest in serving either as an Editor-In-Chief of the entire topic or as an Associate Editor-In-Chief for a subtopic. Please be sure to attach your CV and or biographical sketch.

Overview

The Stubs Iron Wire Gauge system (also known as the Birmingham Wire Gauge) is used in medicine to measure the diameter of hypodermic needles, catheters, and suture wires. It was originally developed in early 19th-century England for use in wire manufacture, and it began appearing in a medical setting in the early 20th century.

The Stubs system was the first wire gauge recognized as a standard by any country when Great Britain adopted it in 1884. Each gauge increment roughly correlates to multiples of .01 inches, but the system is not truly linear, as can be seen in the Needle gauge comparison chart. Also, the needle gauge is inversely proportional to its diameter, so the larger the gauge number, the narrower the diameter.

Another common gauge system is the French catheter scale.

A common approximation used for medical needles is diameter (in inches) is equal to the reciprocal of the gauge.

Needle wire gauge was derived from the Stubs Iron Wire Gauge.

References

• ISO 9626: Stainless steel needle tubing for the manufacture of medical devices, 1st ed. Geneva: International Organization for Standardization, 1991: 1–2.
• ISO 9626: Stainless steel needle tubing for the manufacture of medical devices, Amendment 1. Geneva: International Organization for Standardization, 2001: 1–2.
• Wonsik Ahn, Jae-Hyon Bahk, Young-Jin Lim. The "Gauge" System for the Medical Use, Anesthesia & Analgesia 95, 1125, 2002

External links

• NIH explanation of origin