Guidewire coatings
Editor-In-Chief: C. Michael Gibson, M.S., M.D. [1]
Overview
The distal half (the distal 30-35 cm) of coronary guidewires are coated with slippery (lubricious) materials to reduce the friction of the guidewire as it crosses the blockage in the coronary artery and to also facilitate the passage and delivery of intracoronary devices down the artery.
Classification Of Lubricious Coatings
Hydrophilic
- Attracts water
- It is applied over polymer or stainless steel (including tip coils)
- Thin, non-slippery solid when dry, needs lubrication to perform
- Becomes a gel when wet
- Reduces friction
- Increases trackability
Hydrophobic
Hydrophobic tip and hydrophilic distal end
Commonly used Guidewire Coatings
- PTFE (Polytetrafluroehylene) is the most common coating
- Teflon
- Silicone
- Pro/Pel®, (Medtronic)
- Hydro-track® (Medtronic)
- Hydro-coat (Abbott vascular)