Stilbene
Template:Chembox header | Stilbene | |
---|---|
Template:Chembox header | General | |
Systematic name | trans-1,2-diphenylethylene (E)-1,2-diphenylethene |
Other Names | (E)-stilbene |
trans-stilbene | |
Molecular formula | C14H12 |
C6H5CH=CHC6H5 | |
SMILES | c1(/C=C/c2ccccc2)ccccc1 |
Molar mass | 180.24928 g/mol |
Appearance | Solid |
Color | white - slightly beige |
CAS number | 103-30-0 |
Template:Chembox header | Properties | |
Solubility in water | practically insoluble |
Melting point | 122°C - 125°C |
Boiling point | 305°C - 307°C |
Flash Point | >112°C |
Template:Chembox header | Hazards | |
MSDS | External MSDS |
Template:Chembox header | Except where noted otherwise, data are given for materials in their standard state (at 25°C, 100 kPa) Infobox disclaimer and references |
WikiDoc Resources for Stilbene |
Articles |
---|
Most recent articles on Stilbene |
Media |
Evidence Based Medicine |
Clinical Trials |
Ongoing Trials on Stilbene at Clinical Trials.gov Clinical Trials on Stilbene at Google
|
Guidelines / Policies / Govt |
US National Guidelines Clearinghouse on Stilbene
|
Books |
News |
Commentary |
Definitions |
Patient Resources / Community |
Directions to Hospitals Treating Stilbene Risk calculators and risk factors for Stilbene
|
Healthcare Provider Resources |
Causes & Risk Factors for Stilbene |
Continuing Medical Education (CME) |
International |
|
Business |
Experimental / Informatics |
Please Take Over This Page and Apply to be Editor-In-Chief for this topic: There can be one or more than one Editor-In-Chief. You may also apply to be an Associate Editor-In-Chief of one of the subtopics below. Please mail us [1] to indicate your interest in serving either as an Editor-In-Chief of the entire topic or as an Associate Editor-In-Chief for a subtopic. Please be sure to attach your CV and or biographical sketch.
Overview
Officially known as trans-1,2-diphenylethylene, aka, stilbene, or more specifically, (E)-stilbene, is the alkene, ethene with two phenyl groups on either carbon of the parent chain. The name was derived from the Greek word stilbos, which means shining. It should also be noted, there is also a (Z)-stilbene which is sterically hindered and less stable because of it. Also notice that (Z)-stilbene has a melting point of 5°C to 6°C, while the melting point of (E)-stilbene is in the 125°C area, this illustrates the significant differences between the two. Because (E)-stilbene is so much more common than (Z)-stilbene, this page will focus only on (E)-stilbene.
Its risk and safety phrases are:
- Template:R22 — harmful if swallowed
- Template:R37 — irritating to respiratory system
- Template:R38 — irritating to skin
- Template:R62 — possible risk of impaired fertility
- Template:S22 — do not breathe dust
- Template:S26A — in case of contact with eyes, rinse immediately with water and seek medical advice
- Template:S36 — wear suitable protective clothing
- Template:S37 — wear suitable gloves
- Template:S45 — in case of accident or if you feel unwell seek medical advice immediately, and show the label if possible
Uses of Stilbene
Stilbene is used in manufacture of dyes and optical brighteners, and also as a phosphor and a scintillator.
Stilbene is one of the gain mediums used in dye lasers.
Many stilbene derivates (stilbenoids) are present naturally in plants. An example is resveratrol and its cousin, pterostilbene.
Stilbene Reactions
Halogenation of Stilbene
Simple hydrocarbons are relatively unreactive. In order to form more complex molecules, it is generally necessary to introduce more reactive functional groups. Alkenes (olefins) containing the carbon-carbon double bond may be halogenated to form alkyl halides, which are more capable of undergoing further chemical reactions.
An example of halogenation is the bromination of (E)-stilbene. Bromine is somewhat of a special case due in no small part, to its relatively enormous size compared to carbon. Since elemental bromine (Br2) is volatile and highly corrosive, pyridinium tribromide is commonly used to generate Br2 in situ.
Green halogenation
To green this reaction, the pyridinium tribromide in situ generation of Br2 is replaced with hydrobromic acid, which is oxidized by hydrogen peroxide(H2O2).
- 2HBr + H2O2 → Br2 + 2H2O
In either case the halogenation of stilbene is as follows; as seen in the first reaction, the Br-Br bond attracts the attention of the π-bonding electrons (π-bonds being e- dense and Br being very electronegative), this leads to a weakening and eventual break (heat, plays a crucial role in driving the break forward) of the π-bond. Once the π-bond has been broken, its electrons are transferred to Br2, causing the Br-Br bond to be severed when the bonding electrons are transferred to the other bromine. At this stage there is the positively charged intermediate and the loose bromine ion (Br-), coming from the opposite direction as the Br2, the Br- loosens one of the C-Br Bonds, leaving the final brominated product.
It doesn't matter which stilbene is used for this reaction, (E)-stilbene and (Z)-stilbene will both produce 1,2-dibromo-1,2-diphenylethane. However, bromination of the (Z) isomer results in a racemic mixture of dl stilbene dibromide, while the bromination of an (E) isomer results in a majority meso-stilbene dibromide along with minor amounts of the dl enantiomers. The minor dl product in the bromination of (E)-stilbene is a result of resonance in the bromonium bridge intermediate, where a positive charge is located on one of the two bridge carbons, thus allowing for a syn-addition of a bromine anion.
Photochemical reaction
trans-stilbene isomerizes to cis-stilbene under the influence of light. The reverse path can be induced by heat or light.
More Information
Spectra
References
- Spectral Database for Organic Compounds, SDBS
- (E)-Stilbene on ChemExper
- Green Organic Chemistry, Strategies, tools, and Laboratory Experiments. Kenneth M, Doxsee & James E. Hutchison.
- Organic Chemistry, Eighth Edition. T.W. Graham Solomonds & Craig B. Fryhle.