Isotopes of iron
Naturally occurring iron (Fe) consists of four isotopes: 5.845% of radioactive 54Fe (half-life: >3.1×1022 years), 91.754% of stable 56Fe, 2.119% of stable 57Fe and 0.282% of stable 58Fe.
60Fe is an extinct radionuclide of long half-life (1.5 million years).
Much of the past work on measuring the isotopic composition of Fe has centered on determining 60Fe variations due to processes accompanying nucleosynthesis (i.e., meteorite studies) and ore formation. In the last decade however, advances in mass spectrometry technology have allowed the detection and quantification of minute, naturally occurring variations in the ratios of the stable isotopes of iron. Much of this work has been driven by the Earth and planetary science communities, although applications to biological and industrial systems are beginning to emerge.[1]
The isotope 56Fe is of particular interest to nuclear scientists. A common misconception is that this isotope represents the most stable nucleus possible, and that it thus would be impossible to perform fission or fusion on 56Fe and still liberate energy. This is not true, as both 62Ni and 58Fe are more stable, being the most stable nuclei. However, since 56Fe is much more easily produced from lighter nuclei in nuclear reactions, it is the endpoint of fusion chains inside extremely massive stars and is therefore common in the universe, relative to other metals.
In phases of the meteorites Semarkona and Chervony Kut a correlation between the concentration of 60Ni, the daughter product of 60Fe, and the abundance of the stable iron isotopes could be found which is evidence for the existence of 60Fe at the time of formation of the solar system. Possibly the energy released by the decay of 60Fe contributed, together with the energy released by decay of the radionuclide 26Al, to the remelting and differentiation of asteroids after their formation 4.6 billion years ago. The abundance of 60Ni present in extraterrestrial material may also provide further insight into the origin of the solar system and its early history.
Of the stable isotopes, only 57Fe has a nuclear spin (−1/2).
Standard atomic mass: 55.845(2) u
Table
nuclide symbol |
Z(p) | N(n) | isotopic mass (u) |
half-life | nuclear spin |
representative isotopic composition (mole fraction) |
range of natural variation (mole fraction) |
---|---|---|---|---|---|---|---|
excitation energy | |||||||
45Fe | 26 | 19 | 45.01458(24)# | 4.9(15) ms [3.8(+20-8) ms] | 3/2+# | ||
46Fe | 26 | 20 | 46.00081(38)# | 9(4) ms [12(+4-3) ms] | 0+ | ||
47Fe | 26 | 21 | 46.99289(28)# | 21.8(7) ms | 7/2-# | ||
48Fe | 26 | 22 | 47.98050(8)# | 44(7) ms | 0+ | ||
49Fe | 26 | 23 | 48.97361(16)# | 70(3) ms | (7/2-) | ||
50Fe | 26 | 24 | 49.96299(6) | 155(11) ms | 0+ | ||
51Fe | 26 | 25 | 50.956820(16) | 305(5) ms | 5/2- | ||
52Fe | 26 | 26 | 51.948114(7) | 8.275(8) h | 0+ | ||
52mFe | 6.81(13) MeV | 45.9(6) s | (12+)# | ||||
53Fe | 26 | 27 | 52.9453079(19) | 8.51(2) min | 7/2- | ||
53mFe | 3040.4(3) keV | 2.526(24) min | 19/2- | ||||
54Fe | 26 | 28 | 53.9396105(7) | STABLE [>3.1E+22 a] | 0+ | 0.05845(35) | 0.05837-0.05861 |
54mFe | 6526.9(6) keV | 364(7) ns | 10+ | ||||
55Fe | 26 | 29 | 54.9382934(7) | 2.737(11) a | 3/2- | ||
56Fe | 26 | 30 | 55.9349375(7) | STABLE | 0+ | 0.91754(36) | 0.91742-0.91760 |
57Fe | 26 | 31 | 56.9353940(7) | STABLE | 1/2- | 0.02119(10) | 0.02116-0.02121 |
58Fe | 26 | 32 | 57.9332756(8) | STABLE | 0+ | 0.00282(4) | 0.00281-0.00282 |
59Fe | 26 | 33 | 58.9348755(8) | 44.495(9) d | 3/2- | ||
60Fe | 26 | 34 | 59.934072(4) | 1.5(3)E+6 a | 0+ | ||
61Fe | 26 | 35 | 60.936745(21) | 5.98(6) min | 3/2-,5/2- | ||
61mFe | 861(3) keV | 250(10) ns | 9/2+# | ||||
62Fe | 26 | 36 | 61.936767(16) | 68(2) s | 0+ | ||
63Fe | 26 | 37 | 62.94037(18) | 6.1(6) s | (5/2)- | ||
64Fe | 26 | 38 | 63.9412(3) | 2.0(2) s | 0+ | ||
65Fe | 26 | 39 | 64.94538(26) | 1.3(3) s | 1/2-# | ||
65mFe | 364(3) keV | 430(130) ns | (5/2-) | ||||
66Fe | 26 | 40 | 65.94678(32) | 440(40) ms | 0+ | ||
67Fe | 26 | 41 | 66.95095(45) | 394(9) ms | 1/2-# | ||
67mFe | 367(3) keV | 64(17) µs | (5/2-) | ||||
68Fe | 26 | 42 | 67.95370(75) | 187(6) ms | 0+ | ||
69Fe | 26 | 43 | 68.95878(54)# | 109(9) ms | 1/2-# | ||
70Fe | 26 | 44 | 69.96146(64)# | 94(17) ms | 0+ | ||
71Fe | 26 | 45 | 70.96672(86)# | 30# ms [>300 ns] | 7/2+# | ||
72Fe | 26 | 46 | 71.96962(86)# | 10# ms [>300 ns] | 0+ |
See also
Notes
- Values marked # are not purely derived from experimental data, but at least partly from systematic trends. Spins with weak assignment arguments are enclosed in parentheses.
- Uncertainties are given in concise form in parentheses after the corresponding last digits. Uncertainty values denote one standard deviation, except isotopic composition and standard atomic mass from IUPAC which use expanded uncertainties.
References
- Isotope masses from Ame2003 Atomic Mass Evaluation by G. Audi, A.H. Wapstra, C. Thibault, J. Blachot and O. Bersillon in Nuclear Physics A729 (2003).
- Isotopic compositions and standard atomic masses from Atomic weights of the elements. Review 2000 (IUPAC Technical Report). Pure Appl. Chem. Vol. 75, No. 6, pp. 683-800, (2003) and Atomic Weights Revised (2005).
- Half-life, spin, and isomer data selected from these sources. Editing notes on this article's talk page.
- Audi, Bersillon, Blachot, Wapstra. The Nubase2003 evaluation of nuclear and decay properties, Nuc. Phys. A 729, pp. 3-128 (2003).
- National Nuclear Data Center, Brookhaven National Laboratory. Information extracted from the NuDat 2.1 database (retrieved Sept. 2005).
- David R. Lide (ed.), Norman E. Holden in CRC Handbook of Chemistry and Physics, 85th Edition, online version. CRC Press. Boca Raton, Florida (2005). Section 11, Table of the Isotopes.
Footnotes
- ↑ Dauphas, N. & Rouxel, O. 2006. Mass spectrometry and natural variations of iron isotopes. Mass Spectrometry Reviews, 25, 515-550