Ammeter
Spring providing restoring force
|
WikiDoc Resources for Ammeter |
|
Articles |
|---|
|
Most recent articles on Ammeter |
|
Media |
|
Evidence Based Medicine |
|
Clinical Trials |
|
Ongoing Trials on Ammeter at Clinical Trials.gov Clinical Trials on Ammeter at Google
|
|
Guidelines / Policies / Govt |
|
US National Guidelines Clearinghouse on Ammeter
|
|
Books |
|
News |
|
Commentary |
|
Definitions |
|
Patient Resources / Community |
|
Directions to Hospitals Treating Ammeter Risk calculators and risk factors for Ammeter
|
|
Healthcare Provider Resources |
|
Causes & Risk Factors for Ammeter |
|
Continuing Medical Education (CME) |
|
International |
|
|
|
Business |
|
Experimental / Informatics |
An ammeter is a measuring instrument used to measure the electric current in a circuit. Electric currents are measured in amperes, hence the name. The word "ammeter" is commonly misspelled or mispronounced as "ampmeter" or "ameter" by some.
The earliest design is the D'Arsonval galvanometer or moving coil ammeter. It uses magnetic deflection, where current passing through a coil causes the coil to move in a magnetic field. The voltage drop across the coil is kept to a minimum to minimize resistance across the ammeter in any circuit into which it is inserted.
Moving iron ammeters use a piece or pieces of iron which move when acted upon by the electromagnetic force of a fixed coil of (usually heavy gauge) wire. This type of meter responds to both direct and alternating currents (as opposed to the moving coil ammeter, which works on direct current only).
To measure larger currents, a resistor called a shunt is placed in parallel with the meter. Most of the current flows through the shunt, and only a small fraction flows through the meter. This allows the meter to measure large currents. Traditionally, the meter used with a shunt has a full-scale deflection (FSD) of 50 mV, so shunts are typically designed to produce a voltage drop of 50 mV when carrying their full rated current.
Zero-center ammeters are used for applications requiring current to be measured with both polarities, common in scientific and industrial equipment. Zero-center ammeters are also commonly placed in series with a battery. In this application, the charging of the battery deflects the needle to one side of the scale (commonly, the right side) and the discharging of the battery deflects the needle to the other side.
Digital ammeter designs use an analog to digital converter (ADC) to measure the voltage across the shunt resistor; the digital display is calibrated to read the current through the shunt.
Since the ammeter shunt has a very low resistance, mistakenly wiring the ammeter in parallel with a voltage source will cause a short circuit, at best blowing a fuse, possibly damaging the instrument and wiring, and exposing an observer to injury. In AC circuits, a current transformer converts the magnetic field around a conductor into a small AC current, typically either 1 or 5 Amps at full rated current, that can be easily read by a meter. In a similar way, accurate AC/DC non-contact ammeters have been constructed using Hall effect magnetic field sensors. A portable hand-held clamp-on ammeter is a common tool for maintenance of industrial and commercial electrical equipment, which is temporarily clipped over a wire to measure current.
Ammeter Schematic Symbol
The ammeter symbol (A) is shown in the diagram.
See also
- Clamp meter
- Circuit diagram
- Electric circuit
- Electronic test equipment
- Electronics
- Galvanometer
- List of electronics topics
- Multimeter
- Ohmmeter
- Voltmeter
ar:مقياس التيار الكهربائي bg:Амперметър ca:Amperímetre cs:Ampérmetr da:Amperemeter de:Strommesser el:Αμπερόμετρο eo:Ampermetro fa:آمپرسنج gl:Amperímetro it:Amperometro he:מד זרם lt:Ampermetras hu:Villamos műszerek nl:Ampèremeter simple:Ammeter sl:Ampermeter fi:Ampeerimittari sv:Amperemeter uk:Амперметр