Multi-stage flash distillation
Multi-stage flash distillation is a desalination process that distills sea water by flashing a portion of the water into steam in multiple stages. First, the seawater is heated in a container known as a brine heater. This is usually achieved by condensing steam on a bank of tubes carrying sea water through the brine heater. Heated water is passed to another container known as a "stage", where the surrounding pressure is lower than that in the brine heater. It is the sudden introduction of this water into a lower pressure "stage" that causes it to boil so rapidly as to flash into steam. As a rule, only a small percentage of this water is converted into steam. Consequently, it is normally the case that the remaining water will be sent through a series of additional stages, each possessing a lower ambient pressure than the previous "stage". As steam is generated, it is condensed on tubes of heat exchangers that run through each stage.
Reverse osmosis plants are the most common type, but multi-stage flash distillation plants produce over 85% of all desalinated water in the world. MSF distillation plants, especially large ones, are often paired with power plants in a cogeneration configuration. Waste heat from the power plant is used to heat the seawater, providing cooling for the power plant at the same time. This reduces the energy needed from one-half to two-thirds, which drastically alters the economics of the plant, since energy is by far the largest operating cost of MSF plants. Reverse osmosis, MSF distillation's main competitor, requires more pretreatment of the seawater and more maintenance. [1] [2]
See also
References
- ↑ "Shoaiba Desalination Plant". Water Technology. Retrieved 2006-11-13.
- ↑ Template:Cite paper