Silicosis primary prevention: Difference between revisions
YazanDaaboul (talk | contribs) |
mNo edit summary |
||
(4 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
{{Silicosis}} | {{Silicosis}} | ||
{{CMG}} | {{CMG}} {{AE}} {{AV}} | ||
==Overview== | ==Overview== | ||
Silicosis is a preventable disease. The Occupational Safety and Health Administration (OSHA) has set a permissible exposure limit for respirable silica of 10 mg/m3. The National Institute for Occupational Safety and Health (NIOSH) standard is a more stringent exposure limit of 0.05 mg/m3 | Silicosis is a preventable disease. The Occupational Safety and Health Administration (OSHA) has set a permissible exposure limit for respirable silica of 10 mg/m3. The National Institute for Occupational Safety and Health (NIOSH) standard is a more stringent exposure limit of 0.05 mg/m3. | ||
==Primary Prevention== | ==Primary Prevention== | ||
*Prevention of silicosis is by identification of work-place activities with high concentrations of crystalline silica dust and elimination/control of the exposure. | *Prevention of silicosis is by identification of work-place activities with high concentrations of crystalline silica dust and elimination/control of the exposure. Early intervention with the control or cessation of adverse exposures may result in reversal of symptoms and airflow limitation. | ||
'''''NIOSH Recommended Exposure Limit (REL): NIOSH recommends that employers control exposure to respirable crystalline silica so that no worker is exposed to a time-weighted average concentration of silica greater than 50 µg/m3 of air, as determined by a full-shift sample for up to a 10-hour workday of a 40‑hour workweek''''' | '''''NIOSH Recommended Exposure Limit (REL): NIOSH recommends that employers control exposure to respirable crystalline silica so that no worker is exposed to a time-weighted average concentration of silica greater than 50 µg/m3 of air, as determined by a full-shift sample for up to a 10-hour workday of a 40‑hour workweek''''' | ||
'''''OSHA Permissible Exposure Limit (PEL): The OSHA general industry PEL for quartz, the most common form of crystalline silica, is an 8-hour time-weighted average exposure to respirable dust. For pure quartz silica, the PEL is approximately equal to 100 µg/m3 of air''''' | '''''OSHA Permissible Exposure Limit (PEL): The OSHA general industry PEL for quartz, the most common form of crystalline silica, is an 8-hour time-weighted average exposure to respirable dust. For pure quartz silica, the PEL is approximately equal to 100 µg/m3 of air''''' | ||
*Health monitoring of workers with exposure to respirable crystalline quartz using chest radiographs and spirometry may assist in the early diagnosis and management. | |||
*Measures employed to limit the exposure to crystalline silica <ref>{{Cite web | title =Worker Exposure to Silica during Countertop Manufacturing, Finishing and Installation | url =https://www.osha.gov/Publications/OSHA3768.pdf}}</ref> : | *Measures employed to limit the exposure to crystalline silica <ref>{{Cite web | title =Worker Exposure to Silica during Countertop Manufacturing, Finishing and Installation | url =https://www.osha.gov/Publications/OSHA3768.pdf}}</ref> : | ||
:*Employers should provide appropriate controls for crystalline silica-containing dust. | :*Employers should provide appropriate controls for crystalline silica-containing dust. | ||
:*Use all available engineering controls such as blasting cabinets, water sprays, and local exhaust ventilation. | :*Use all available engineering controls such as blasting cabinets, water sprays, and local exhaust ventilation. | ||
:*Use less hazardous materials if available and can be used. | :*Use less hazardous materials if available and can be used. | ||
:*Be aware of the health effects of crystalline silica and that smoking adds to the damage. | :*Be aware of the health effects of [[crystalline silica]] and that [[smoking]] adds to the damage. | ||
:*Know about work operations where exposure to crystalline silica may occur. | :*Know about work operations where exposure to [[crystalline silica]] may occur. | ||
:*Participate in any air monitoring or training programs offered by the employer. | :*Participate in any air monitoring or training programs offered by the employer. | ||
:*Use type CE positive pressure abrasive blasting respirators for sandblasting. | :*Use type CE positive pressure abrasive blasting respirators for [[sandblasting]]. | ||
:*Use unaltered respirators when required for protection against crystalline silica-containing dust. Workers who use tight-fitting respirators cannot have beards/mustaches which interfere with the respirator seal to the face. | :*Use unaltered respirators when required for protection against [[crystalline silica]]-containing dust. Workers who use tight-fitting respirators cannot have beards/mustaches which interfere with the respirator seal to the face. | ||
:*Allocation of specific disposable or washable work clothes at the worksite; | :*Allocation of specific disposable or washable work clothes at the worksite; showering and changing into clean clothing before leaving the worksite. | ||
:*Do not eat, drink, use tobacco products, or apply cosmetics in areas where there is dust containing crystalline silica. | :*Do not eat, drink, use tobacco products, or apply [[cosmetics]] in areas where there is dust containing [[crystalline silica]]. | ||
:*Wash hands and face before eating, drinking, smoking, or applying cosmetics outside of the exposure area | :*Wash hands and face before [[eating]], [[drinking]], [[smoking]], or [[applying cosmetics]] outside of the exposure area. | ||
==References== | ==References== | ||
Line 28: | Line 29: | ||
{{Reflist|2}} | {{Reflist|2}} | ||
[[Category:Pulmonology]] | [[Category:Pulmonology]] | ||
{{WH}} | {{WH}} | ||
{{WS}} | {{WS}} |
Latest revision as of 15:38, 8 June 2016
Silicosis Microchapters |
Diagnosis |
---|
Treatment |
Case Studies |
Silicosis primary prevention On the Web |
American Roentgen Ray Society Images of Silicosis primary prevention |
Risk calculators and risk factors for Silicosis primary prevention |
Editor-In-Chief: C. Michael Gibson, M.S., M.D. [1] Associate Editor(s)-in-Chief: Aparna Vuppala, M.B.B.S. [2]
Overview
Silicosis is a preventable disease. The Occupational Safety and Health Administration (OSHA) has set a permissible exposure limit for respirable silica of 10 mg/m3. The National Institute for Occupational Safety and Health (NIOSH) standard is a more stringent exposure limit of 0.05 mg/m3.
Primary Prevention
- Prevention of silicosis is by identification of work-place activities with high concentrations of crystalline silica dust and elimination/control of the exposure. Early intervention with the control or cessation of adverse exposures may result in reversal of symptoms and airflow limitation.
NIOSH Recommended Exposure Limit (REL): NIOSH recommends that employers control exposure to respirable crystalline silica so that no worker is exposed to a time-weighted average concentration of silica greater than 50 µg/m3 of air, as determined by a full-shift sample for up to a 10-hour workday of a 40‑hour workweek OSHA Permissible Exposure Limit (PEL): The OSHA general industry PEL for quartz, the most common form of crystalline silica, is an 8-hour time-weighted average exposure to respirable dust. For pure quartz silica, the PEL is approximately equal to 100 µg/m3 of air
- Health monitoring of workers with exposure to respirable crystalline quartz using chest radiographs and spirometry may assist in the early diagnosis and management.
- Measures employed to limit the exposure to crystalline silica [1] :
- Employers should provide appropriate controls for crystalline silica-containing dust.
- Use all available engineering controls such as blasting cabinets, water sprays, and local exhaust ventilation.
- Use less hazardous materials if available and can be used.
- Be aware of the health effects of crystalline silica and that smoking adds to the damage.
- Know about work operations where exposure to crystalline silica may occur.
- Participate in any air monitoring or training programs offered by the employer.
- Use type CE positive pressure abrasive blasting respirators for sandblasting.
- Use unaltered respirators when required for protection against crystalline silica-containing dust. Workers who use tight-fitting respirators cannot have beards/mustaches which interfere with the respirator seal to the face.
- Allocation of specific disposable or washable work clothes at the worksite; showering and changing into clean clothing before leaving the worksite.
- Do not eat, drink, use tobacco products, or apply cosmetics in areas where there is dust containing crystalline silica.
- Wash hands and face before eating, drinking, smoking, or applying cosmetics outside of the exposure area.