Silicosis primary prevention: Difference between revisions
Jump to navigation
Jump to search
YazanDaaboul (talk | contribs) |
YazanDaaboul (talk | contribs) |
||
| Line 10: | Line 10: | ||
'''''NIOSH Recommended Exposure Limit (REL): NIOSH recommends that employers control exposure to respirable crystalline silica so that no worker is exposed to a time-weighted average concentration of silica greater than 50 µg/m3 of air, as determined by a full-shift sample for up to a 10-hour workday of a 40‑hour workweek''''' | '''''NIOSH Recommended Exposure Limit (REL): NIOSH recommends that employers control exposure to respirable crystalline silica so that no worker is exposed to a time-weighted average concentration of silica greater than 50 µg/m3 of air, as determined by a full-shift sample for up to a 10-hour workday of a 40‑hour workweek''''' | ||
'''''OSHA Permissible Exposure Limit (PEL): The OSHA general industry PEL for quartz, the most common form of crystalline silica, is an 8-hour time-weighted average exposure to respirable dust. For pure quartz silica, the PEL is approximately equal to 100 µg/m3 of air''''' | '''''OSHA Permissible Exposure Limit (PEL): The OSHA general industry PEL for quartz, the most common form of crystalline silica, is an 8-hour time-weighted average exposure to respirable dust. For pure quartz silica, the PEL is approximately equal to 100 µg/m3 of air''''' | ||
*Health monitoring of workers with exposure to respirable crystalline quartz using chest radiographs and spirometry may assist in the early diagnosis and management. | |||
*Measures employed to limit the exposure to crystalline silica <ref>{{Cite web | title =Worker Exposure to Silica during Countertop Manufacturing, Finishing and Installation | url =https://www.osha.gov/Publications/OSHA3768.pdf}}</ref> : | *Measures employed to limit the exposure to crystalline silica <ref>{{Cite web | title =Worker Exposure to Silica during Countertop Manufacturing, Finishing and Installation | url =https://www.osha.gov/Publications/OSHA3768.pdf}}</ref> : | ||
:*Employers should provide appropriate controls for crystalline silica-containing dust. | :*Employers should provide appropriate controls for crystalline silica-containing dust. | ||
| Line 21: | Line 23: | ||
:*Allocation of specific disposable or washable work clothes at the worksite; showerin and changing into clean clothing before leaving the worksite. | :*Allocation of specific disposable or washable work clothes at the worksite; showerin and changing into clean clothing before leaving the worksite. | ||
:*Do not eat, drink, use tobacco products, or apply cosmetics in areas where there is dust containing crystalline silica. | :*Do not eat, drink, use tobacco products, or apply cosmetics in areas where there is dust containing crystalline silica. | ||
:*Wash hands and face before eating, drinking, smoking, or applying cosmetics outside of the exposure area | :*Wash hands and face before eating, drinking, smoking, or applying cosmetics outside of the exposure area. | ||
==References== | ==References== | ||
Revision as of 14:41, 19 June 2015
|
Silicosis Microchapters |
|
Diagnosis |
|---|
|
Treatment |
|
Case Studies |
|
Silicosis primary prevention On the Web |
|
American Roentgen Ray Society Images of Silicosis primary prevention |
|
Risk calculators and risk factors for Silicosis primary prevention |
Editor-In-Chief: C. Michael Gibson, M.S., M.D. [1]
Overview
Silicosis is a preventable disease. The Occupational Safety and Health Administration (OSHA) has set a permissible exposure limit for respirable silica of 10 mg/m3. The National Institute for Occupational Safety and Health (NIOSH) standard is a more stringent exposure limit of 0.05 mg/m3
Primary Prevention
- Prevention of silicosis is by identification of work-place activities with high concentrations of crystalline silica dust and elimination/control of the exposure.
NIOSH Recommended Exposure Limit (REL): NIOSH recommends that employers control exposure to respirable crystalline silica so that no worker is exposed to a time-weighted average concentration of silica greater than 50 µg/m3 of air, as determined by a full-shift sample for up to a 10-hour workday of a 40‑hour workweek OSHA Permissible Exposure Limit (PEL): The OSHA general industry PEL for quartz, the most common form of crystalline silica, is an 8-hour time-weighted average exposure to respirable dust. For pure quartz silica, the PEL is approximately equal to 100 µg/m3 of air
- Health monitoring of workers with exposure to respirable crystalline quartz using chest radiographs and spirometry may assist in the early diagnosis and management.
- Measures employed to limit the exposure to crystalline silica [1] :
- Employers should provide appropriate controls for crystalline silica-containing dust.
- Use all available engineering controls such as blasting cabinets, water sprays, and local exhaust ventilation.
- Use less hazardous materials if available and can be used.
- Be aware of the health effects of crystalline silica and that smoking adds to the damage.
- Know about work operations where exposure to crystalline silica may occur.
- Participate in any air monitoring or training programs offered by the employer.
- Use type CE positive pressure abrasive blasting respirators for sandblasting.
- Use unaltered respirators when required for protection against crystalline silica-containing dust. Workers who use tight-fitting respirators cannot have beards/mustaches which interfere with the respirator seal to the face.
- Allocation of specific disposable or washable work clothes at the worksite; showerin and changing into clean clothing before leaving the worksite.
- Do not eat, drink, use tobacco products, or apply cosmetics in areas where there is dust containing crystalline silica.
- Wash hands and face before eating, drinking, smoking, or applying cosmetics outside of the exposure area.